top of page

Equipment Gallery - Field Ready Recovery Setup

20260310_140750 2.jpg
20260310_140744 1.jpg
High-Pressure Refrigerant Recovery Cart Featuring:

  • Tube-and-shell water-cooled condenser (reduces high vapor recovery head pressures)

  • Air-cooled condenser

  • Blissfield Type “G” compressor

  • Marathon 110V motor

  • Oil separator

  • Suction-side no-slug accumulator

  • Filter drier for moisture control

Welch CRR-1A Recovery Unit Featuring:

  • Oil separator

  • Johnson pressure switch

  • Tube-and-shell water-cooled condenser

  • Magliner frame

  • Custom Apollo ball valve manifold (no hose disconnection)

  • Low-loss fittings

High-Pressure Refrigerant Recovery Cart Featuring:

  • Blissfield Type “G” compressor

  • Marathon 110V motor

  • Oil separator

  • ¾" Apollo ball valve low-loss refrigerant connections

  • Configured primarily for shop use (field-ready as needed)

5 half tons modified.jpg
20260321_091157.jpg
hslf ton modified tank(1).jpg
(6)1000# Manchester recovery tanks (field recovery modified)

¾" Apollo ball valve setup – field-ready configuration for faster recovery rates

Tank Condition & Status

  • Hydro dates expired (2018)

  • Minimal use – well maintained

  • Stored indoors (no rust or exposure)

  • Internally flushed per ARI recovery standards

  • No contamination present

Made In America !

(6) 250# Manchester Refrigerant Recovery Cylinders

(18) 125# Manchester Refrigerant Recovery Cylinders

Hoses and Chiller Adaptors

20230607_143423.jpg
58 hose sets.jpg

⅝" hoses – 225 ft each (450 ft total); 600 PSI WP; includes (2) Apollo ball valves low loss connection, like-new condition; roll-up racks included- excellant for dropping down the side of tall buildings.

Mixed lengths (50’, 20’, 10’, 4’) high pressure refrigerant compatible; valves installed on each assembly. Pallett ready for logistical set up in chiller plant.

Mixed lengths (50’, 20’, 10’, 4’) high pressure refrigerant compatible.

5' - ⅜" high pressure hose with ball valve and hand tightened valve adaptor for air-cooled chiller applications

20260207_105430.jpg
black trailer back side.jpg

Valve Assemplies for chiller connection

Valve Assemplies for chiller connections and drum adaptors for filling low pressure drums

Work from the trailer. Run the hose.

Don't want to pay the freight? Buy the trailer take it home with you. Add $7000

Chain fall for weighing used refrigerant. Additional uses for lifting equipment and cylinders to penthouse chiller rooms.

IMG_20191224_113054.jpg
PXL_20220609_221501069.jpg
parts hvac ref rec 12212023 3.jpg

Field ready scale for documenting recover weight of refrigerant.

Rigging , scale chainfall for measuring weight recovered.

Misc. Brass / Cooper conectors to adapt to chillers.

Sample Systems / De-Hydration Station

Neutronics Ultima Id for purity testing . Used primarily for HCFC22, HCFC 134a and HCFC 410a. shows non-condensable and crossed gas contamination.

Field testing refrigerant purity eliminating mixed refrigerant

3-Phase Electrical on Cart 300' for future  de-contamination / de-hydration rig

heater final set up .jpg

Included in offering; starter required for operation. Some components are designated for future de-hydration and de-contamination builds.

Final Heater Assembly: Shown is the completed heater build used for demonstration purposes only. Heaters are not included in the package; a starter unit is required for operation.

​

dehydration system.jpg

Low-Pressure Refrigerant Sample Bottles

DOT-approved sample bottles designed for the safe handling and transportation of low-pressure refrigerant samples to laboratory facilities for purity verification. Primary testing includes moisture analysis and detection of contaminants that can impact refrigerant integrity and equipment reliability.

High-Pressure Refrigerant Sample Cylinders

DOT-approved high-pressure cylinders designed for the safe handling and hazmat transportation of refrigerant samples to certified laboratory facilities for purity verification. Used for sampling high-pressure refrigerants prior to recycling, reclamation, or reuse operations.

Dehydration System — Refrigerant Moisture Removal

This dehydration system provides controlled moisture removal from recovered refrigerants and is capable of single-pass or multiple-pass processing based on system requirements. It is primarily utilized following oil stripping operations as part of in-house refrigerant recycling and decontamination procedures.

Molecular Sieve Bead X13 — Refrigerant Dehydration Media used to remove moisture from refrigerants during recycling  processing. Moisture contamination can react with chlorofluorocarbons (CFCs) and other refrigerants, forming acids that may damage equipment and reduce refrigerant quality.

bottom of page